Stop Asking Your AI to Do Everything in One Prompt (3 Fixes That Work)

Most people treat a complex prompt like a to-do list. Dump everything in, hit enter, hope for the best. A prompt tester on r/PromptEngineering has a different approach, and it’s simpler than it sounds: give the model less to do per turn.

The poster, u/Dean_ThinkingVault, spent months logging every time Gemini, ChatGPT, and Claude took a lazy shortcut, skipped a rule buried in a prompt, or made up data just to finish a table. The log grew to 45 failure modes. Three of them cause most of the daily pain, and each has a fix you can use today.

The Key Idea

Models don’t fail randomly. They fail in patterns, and the patterns get worse when you stack tasks. Reading, searching, reasoning, and formatting all in one turn is where things fall apart. Fewer jobs per turn means better results.

One commenter summed it up well: this sounds like “keep tasks as small as possible.” That’s close to the whole lesson.

Old Way vs. New Way

Trap 1: The everything-in-Turn-1 prompt

  • Old way: Upload a 4,000-word document and ask the model to read it, run live web searches to verify facts, and format an executive summary table. All in one go.
  • What goes wrong (per the poster): the middle of long inputs gets underweighted (the “Lost in the Middle” effect), the model may skip some of the live searches and guess from memory, and forcing rigid table or JSON formatting while it reasons costs accuracy. The poster puts that cost at 15 to 25 percent. Treat that number as their estimate, not a benchmark.
  • New way: a Two-Turn Split. Turn 1 only extracts raw facts and verifies them. Turn 2 asks for the table or summary, with the clean facts already in the chat.

Trap 2: Arguing with a bad image

  • Old way: The image has the wrong side of the car or an extra person in the background, so you reply in the same chat: “fix that.” You often get the exact same image back.
  • What goes wrong: the model stays anchored to what’s already in the thread, and the cheapest path is to repeat it.
  • New way: Open a fresh chat. Describe the final, correct scene from scratch, positively, without mentioning the earlier mistake. Ask explicitly for a new render, not a cached one.

A commenter hit exactly this: great first result, then a disaster on the “easier” correction request.

Trap 3: The “etc.” escape hatch

  • Old way: Ask for an audit of 15 items in one response.
  • What goes wrong: Items 1 to 5 get real analysis. Items 6 to 10 get one-liners. Items 11 to 15 get lumped into “etc.” or marked “N/A.”
  • New way: Ban the lazy phrases, set a minimum for every item, or break the job into batches.

Practical Steps 🛠️

  1. Split extraction from formatting. Turn 1: pull the facts and verify them. Turn 2: paste your table or summary instructions fresh.
  2. Reset instead of patching images. Start a new chat, describe the corrected scene from zero, and leave the old mistake out of it.
  3. Ban the escape words. In your prompt, write: do not use “N/A”, “etc.”, “and so on”, or “similarly.”
  4. Set a floor per item. For example: every item from 1 to 15 gets at least 60 words or 3 data points.
  5. Batch long lists. Run 5 items at a time, then combine the results.
  6. Chunk long documents. One commenter fed a 6,000-word legal brief to a model and got a summary of the first and last 1,000 words only. Chunked processing with a merge step fixed it.

What I’d Take From This

A few of the mechanisms the poster describes (compute cost, router behavior) are their own explanations, and I can’t verify them from the outside. The fixes, though, are cheap to test. Splitting a prompt into two turns costs you almost nothing, and you’ll see within one run whether it helps.

The poster also mentions a 55-slide walkthrough covering all 45 biases and said they’d share a link in the comments. Several people were asking for it, so check the original thread.

Your Move 🏴‍☠️

Pick the one workflow that annoys you most this week. Take your biggest prompt, cut it in half, and run it as two turns. Compare the results side by side.

Which model shortcut has been burning your workflows lately? Tell me, and I’ll dig into it next.

Frequently Asked Questions

Q: Does all of this just come down to keeping tasks small?

Mostly, yes. That’s the thread running through the comments, and splitting a big request into a fact-gathering turn and a formatting turn are both ways of making each step smaller. The mechanisms behind these failures are still partly a guess, though, so treat small tasks as a habit to test on your own work rather than a proven rule.

Q: How do I handle a long document without the middle getting skipped?

One commenter hit this with a 6,000-word legal brief, where the model summarized the first and last 1,000 words and quietly skipped everything in between. Their fix was chunked processing: split the document into sections, summarize each one with the same instructions, then run a final pass that merges the summaries. Pair that with the two-turn split from the post so the formatting only happens after the facts are sitting in the chat.

Q: Do persona prompts and ‘think step by step’ still help on newer models?

A commenter who followed up on the post says they now backfire. A long ‘world-class expert’ backstory can make the model copy an authority tone instead of checking edge cases, so strict boundary rules and explicit verification steps tend to work better. Asking the model to recalculate from scratch before judging your number, or to try to break both options before picking one, also helps with sycophancy. Another commenter cautions that these failure names are labels for behavior nobody fully sees, so run a quick before and after test on your own prompts before dropping a habit that works for you.

Q: What’s the real danger when a model says it ‘verified’ something?

One commenter said their worst offender is a confident ‘verified’ when nothing was actually checked. A skipped row is easy to spot, but a fabricated confirmation often only surfaces when the client catches it. To guard against this, ask the model to list each item it checked, the source it checked against, and the result. Anything without a source should be marked unverified so the gaps show up before the output leaves your desk.

I spent the last few months logging 45 hidden LLM biases and architectural blind spots that break complex prompts. Here are the 3 that trip people up the most and how to fix them
by u/Dean_ThinkingVault in PromptEngineering

Scroll to Top